GeniSys® 7580 240V Oil Burner Control

The Beckett GeniSys® 7580 Oil Burner Control is a 240 VAC primary safety control for Commercial / Industrial pressure washer and other industrial applications. The GeniSys® 7580 is used with the GeniSys® CAD Cell Flame Detector Kit 7006U to control the oil burner’s motor, igniter, and optional solenoid valve. The control operates the burner with interrupted ignition with a 15 second lockout time.

With the GeniSys® Contractor Tool 52082, the control can be programmed with pre-purge and post-purge timings. For diagnostics, the GeniSys® 7580 stores the last 15 cycles.

About

Features & Benefits

  • Epoxy potted for moisture resistance
  • Compatible with most operating controls
  • Customizable pre-time and post-time
  • Three status lights for system monitoring and diagnostics
  • Welded relay protection with redundant motor relays
  • Limited reset and limited recycle
  • Sleek, modern design
  • Technician pump prime mode
  • 18 month warranty
  • Communication ports for the GeniSys® Contractor Tool

Electrical Ratings

Inputs

    • Voltage: 208-240 VAC
    • Current: 100 mA plus burner motor, igniter, and valve loads

Outputs

    • Motor: 208/240 Vac, 5 full load amps (FLA*), 30 locked rotor amps (LRA)
      • Note: Reduce motor FLA rating by igniter current
    • Igniter: 208/240 Vac, 3 A @ 0.7 PF min
    • Solenoid Valve: 208/240 Vac, 1 A @ 0.7 PF min

Application Ratings

    • Oil Burner Input: less than 20gph

Environmental Ratings

    • Storage & Operating Ambient Temperature: -40°F to +150°F (-40°C to +65°C)
    • Moisture: 5 to 95%

Available Models for GeniSys® 7580 240V Oil Burner Control

Control Part Number Lockout Time Valve-On
Delay Time1
Motor-Off
Delay Time1
7580A0000 15 sec
7580B1500 15 sec 15 sec
7580P1515 15 sec 15 sec 15 sec
7580P152M 15 sec 15 sec 2 min
7580P054M 15 sec 15 sec 4 min

1 Valve-on delay and motor-off delay timings on all models are programmable with Beckett GeniSys® Contractor Tool.

GeniSys® Contractor Tool

Add a GeniSys® Contractor Tool to fully utilize the features of the GeniSys advanced burner control. The GeniSys® Contractor Tool allows a technician to monitor and program the primary control variables. The display shows current burner status, control timings, and burner cycle history. The display’s programming mode allows a technician to customize both the pretime and post-time settings and a lockout service message.

Warranty

Please note, all warranty claims must be initiated through an authorized Beckett supplier/distributor. Distribution policies will not allow Beckett to directly handle warranty claims with installers and/or consumers.

Click to view Limited Warranty for Beckett Products.

Click here to check if your part is still under warranty

Beckett Training is Now Online

Informative and technical training resources from the leading experts in the heating industry

We're Here to Help!

Have questions about our products? Looking for a solution to address a particular application? Looking to improve the overall productivity and profitability of your operation? Please don’t hesitate to reach out or schedule a no obligation, 1-on-1 consultation with a Beckett Technical Specialist — we’d love to help.

Where to Buy

Beckett solutions are available through our network of Distributors, Independent Representatives, and Export Representatives all around the world.