Setting the Electrodes and Z Dim Using the Z Gauge

Jan 13, 2022 | Burner Tutorials, Tutorials

This Quick Tutorial Will Guide you Through the Steps on Setting the “Z” Dim and Electrodes Using the Beckett Z Gauge 

Setting the electrodes and Z dimension using the Beckett “Z” gauge

Begin by removing the nozzle line electrode assembly

Slide the Beckett Z guage over the nozzle and make sure the electrodes are flush with the end of the gauge

After the electrodes are set, re-install the NLEA

Push the NLEA forward as far as it will go

Mark the escutcheon plate location on the burner housing

Remove the NLEA and gauge

Re-install the NLEA

Adjust the escutcheon plate to the mark on the housing

The “Z” dimension is now set

Move the escutcheon plate 1/16’’ forward for an AFII burner with the FBX airtube combination

Beckett Training is Now Online

Informative and technical training resources from the leading experts in the heating industry

We're Here to Help!

Have questions about our products? Looking for a solution to address a particular application? Looking to improve the overall productivity and profitability of your operation? Please don’t hesitate to reach out or schedule a no obligation, 1-on-1 consultation with a Beckett Technical Specialist — we’d love to help.

Where to Buy

Beckett solutions are available through our network of Distributors, Independent Representatives, and Export Representatives all around the world.